The warranty must be registered within seven days of installation.

The owner must complete an annual coating inspinstallerection with the installer.

The owner must maintain the vehicle in conjunction with the Autobead Silex Terms of Maintenance.

What is covered?

The coating will maintain the gloss of your car, protect it from most elements, and retain its self-cleaning capabilities. It will also make removing bird droppings, organic contamination, tar deposits, bugs, and acid marks easier. The coating's beading and sheeting properties will last at least 50% of the coating durability promise after application. Providing you follow the recommended maintenance guidelines and avoid exposing your car to extreme conditions.

All coatings follow these conditions:

The process followed the manufacturer's guidelines and the most up-to-date user manual.

The warranty was registered online within the first seven days after installation.

The vehicle was not washed with any detergents for the first 10 days to allow the coating to cure.

The car was not washed in an automatic or commercial car wash.

After the initial service, the vehicle was not serviced by any other detailing company not approved by Autobead, including dealerships and workshops.

The paint surface was decontaminated with Autobead Iron Remover, and Autobead Heavy Dirt (25:1 dilution) was used at least once every three months for maintenance.

The warranty is only valid for the registered owner at the installation time and is not transferable.

The warranty is void on damaged or repaired panels.

The car was maintained using only Autobead Maintenance Products following the “Terms of Maintenance” process.

Terms of Maintenance

An annual inspection with the Autobead Accredited Detailer.

If the customer notices bird lime on the vehicle, they should safely remove it immediately to reduce the chance of damage..

Customers can maintain the vehicle or have an Autobead Accredited Detailer maintain it.

If the customer opts to maintain it by themselves, they must maintain the vehicle every four weeks, following these steps:

Pre-wash (using Autobead Heavy Dirt (25:1 dilution) and/or Autobead Snow Foam (4:1 dilution))

Contact Wash (using Autobead Ceramic Shampoo or Autobead Pure Shampoo)

Protection (using Autobead Ceramic Quick Detailer or Autobead Quick Detailer)

The customer must decontaminate the vehicle every three months with the following steps:

• Pre-wash (using Autobead Heavy Dirt (25:1 dilution) and/or Autobead Snow Foam (4:1 dilution))
• Decontamination (using Autobead Iron Remover. IF required, use Autobead Tar Gel)
• Contact Wash (using Autobead Ceramic Shampoo or Autobead Pure Shampoo)
• Protection (using Autobead Ceramic Quick Detailer or Autobead Quick Detailer)